Moisture investigation
Trace leaks, condensation and elevated readings behind finishes.
Certified Mold Remediation
Mold Removal in Vancouver, BC
Contain, remove and prevent return
Professional mold containment, removal and moisture-source correction for properties across Metro Vancouver.
IICRC Certified30+ Years of ExperienceCertified Remediation
Detailed mold remediation for homes and businesses in Metro Vancouver.
IICRC Certified CrewsMold remediation protocol
Prompt AssessmentsA real person answers
30+ Years of ExperienceFull-service restoration
Insurance CoordinationCertified and insured
Mold Removal in Metro Vancouver
Why mold needs professional remediation
Mold is a moisture problem before it is a surface problem. In Metro Vancouver, safe remediation means finding why the material stayed wet, containing the work zone and removing affected porous materials without spreading spores.
Moisture drives growth
Leaks, condensation and poor ventilation must be corrected or mold can return after cleaning.
Disturbance spreads spores
Dry brushing, sanding or demolition without containment can carry spores into clean rooms.
Porous materials differ
Drywall, insulation and carpet often require removal, while many hard surfaces can be cleaned.
Hidden cavities matter
Mold may continue behind baseboards, cabinets and finished walls beyond the visible patch.
Air control protects occupants
Containment and HEPA-filtered negative air keep the work zone separated during removal.
Verification closes the job
A clean visual inspection and dry readings confirm the source and affected materials were addressed.
Mold removal services we provide across Metro Vancouver
Our Metro Vancouver mold remediation scope addresses the visible growth, hidden moisture and building conditions that allowed the problem to develop.
Containment setup
Isolate the work area and establish HEPA-filtered negative air.
Controlled material removal
Remove affected porous finishes without spreading debris through the property.
HEPA cleaning
Clean retained surfaces and the work area with professional HEPA equipment.
Antimicrobial treatment
Apply appropriate treatment to clean, salvageable materials where specified.
Structural drying
Dry retained framing and correct elevated moisture before reconstruction.
Post-remediation cleaning
Complete detailed cleaning before containment comes down.
Repairs and prevention
Restore removed finishes and recommend ventilation or moisture corrections.
Common causes of household mold across Metro Vancouver homes
Mold always follows a moisture source, and in a Metro Vancouver home that source is usually one of four: humid air with nowhere to go, a cold surface that condenses, a leak inside a cavity, or ground moisture under the floor. These are the ones we find most often.
Bathroom humidity and poor ventilation
- An exhaust fan that is missing, undersized or vented into the attic leaves the moisture in the house
- Warm wet air condenses on the coolest surfaces first, usually the ceiling and the outside wall
- Repeated wetting with slow drying is what lets growth take hold on paint, drywall and caulking
Attic condensation
- Warm moist air rises through gaps at the hatch, light fixtures and top plates
- It condenses on cold sheathing and nails, then drips back into the insulation
- Blocked soffit venting and bathroom fans ducted into the attic make it worse
Hidden plumbing leaks
- A slow leak inside a closed cavity keeps materials wet with no chance to dry
- Insulation holds that water against the drywall and the framing
- We trace leaks, condensation and elevated readings behind finishes before anything is opened
Damp crawl space
- Ground moisture evaporates out of exposed soil into the joists, subfloor and insulation
- Standing water after heavy rain, poor grading or a failed perimeter drain keeps it wet
- We dry retained framing and correct elevated moisture before any reconstruction
Our 7 Step Remediation Process
A documented remediation process from assessment through repair
Mold remediation follows containment, controlled removal, detailed cleaning, drying and final verification in that order.
Assessment and moisture investigation
We inspect the visible growth, take moisture readings and trace leaks, condensation and elevated readings behind finishes.
Containment and negative air
The work zone is isolated and put under HEPA-filtered negative air before anything is disturbed.
Controlled material removal
Affected porous finishes are removed and bagged inside the containment so debris is not carried through the property.
HEPA cleaning and treatment
Retained surfaces are HEPA cleaned, and antimicrobial treatment is applied to clean salvageable materials where specified.
Moisture-source correction and drying
The leak, condensation or ventilation problem is corrected and retained framing is dried before anything is closed up.
Post-remediation verification
A clean visual inspection and dry readings confirm the area before containment comes down, with third-party clearance testing when it is specified.
Repairs and prevention
We restore the removed finishes and recommend the ventilation or moisture corrections that keep it from coming back.
What Happens Next
From assessment to completed remediation
Clear stages keep the work contained, documented and easy to follow across Metro Vancouver.
Assessment
Find moisture and scope
We inspect the visible area, take moisture readings and identify likely hidden growth.
Remediation
Contain and remove
The work zone is isolated before affected materials are removed and retained surfaces cleaned.
Completion
Dry and verify
Dry readings and a final inspection confirm the area is ready for repairs.
A real person answers
Call the office and we will book your assessment, explain what to expect and start the containment plan.
Metro Vancouver and Surrounding Areas
Local mold removal across Metro Vancouver
On Command dispatches across Metro Vancouver from our Surrey headquarters at Unit 1, 5508 Production Blvd. We provide mold remediation across the region, including Maple Ridge, plus the surrounding Fraser Valley.
- Detailed assessment and containment
- Fully equipped and certified team
- Cleanup, drying and reconstruction
15 communities covered
Dispatch baseSurrey, 5508 Production Blvd
What Our Clients Say
What Metro Vancouver homeowners say
Customers trust On Command during stressful situations because our team communicates clearly, works safely, and helps guide the next steps.
Certified. Trusted. Proven.
IICRC Certified
Certified & Insured
Canadian Owned
★★★★★
We presented Manny and his team with a real challenge in dealing with asbestos insulation contamination in a building more than 70 years old. Not only was the contaminated vermiculite mixed with old fiberglass...
★★★★★
Had a great experience with Manny and his professional crew. Very quick response, they came to site the next day fully equipped and ready. They got the job done right, safe, and on time. Totally recommend.
★★★★★
We had an excellent experience with On Command Services. Manny was incredibly professional, knowledgeable, and helpful throughout the entire process. He took the time to explain everything clearly and eased our concerns...
★★★★★
This company has attended and completed several jobs in my building, my unit included. I was very impressed by their efficiency, communication, thoroughness, and general manner. Not only are they great at what they do,...
★★★★★
Manny and his team did a great job helping me do some repairs around my property (replacing rotted wood in deck, waterproofing deck, and some minor interior fixes with doors that wouldn't close properly). They were...
★★★★★
Manny and his team were a pleasure to deal with. They were professional, thorough, detail oriented and timely. Highly recommend to consumers and insurance providers alike!
★★★★★
The best place to deal with... they are so professional and loved their customer service....manny and his team did great. gonna recommend to my friends and family. Thank you !!
★★★★★
We had a mould issue in our bathroom, Manny and his crew came out for an assement and removal mannys crew took care of the job fast and clean. Highly recommend ONCOMMAND, very professional and friendly great company!
Why Choose Us
Why Metro Vancouver homeowners call On Command
When mold appears, you need more than surface cleaning. You need a certified local team that corrects the moisture source.
IICRC-certified crews
Trained in mold remediation and containment, not a general handyman crew.
30+ years of experience
Handling Metro Vancouver mold and moisture problems of every size.
Lower Mainland coverage
Surrey-based crews and equipment serve the Lower Mainland and Fraser Valley.
Prompt scheduling
A real person answers, and assessments are booked quickly.
Full-service, one crew
From assessment through containment, removal, drying and repairs.
Certified and insured
With insurance coordination on every job.
Third-Party Testing
Need confirmation before or after remediation?
When third-party sampling or clearance is appropriate, use a third-party environmental testing firm so testing stays separate from the removal scope.
Questions? We've Got Answers
Mold removal in Metro Vancouver: common questions
Get quick answers to common questions about mold, our assessment, and our remediation process.
Bleach is not a complete remediation method for porous building materials and does not solve the moisture source. Disturbing mold without containment can spread spores into clean areas. Health Canada recommends fixing the moisture problem, cleaning small areas safely and seeking professional help for extensive or recurring growth.
Further reading
Before you call your insurer
Mold coverage turns on the cause. A sudden insured water loss is treated very differently from long-term condensation.
Mold in your Metro Vancouver home? Book an assessment.
Do not disturb the mold or paint over it. Call On Command for professional mold remediation across Metro Vancouver, or request a callback and we will book an assessment.
Speak With Our Team604 539 5747
Detailed mold remediation for homes and businesses in Metro Vancouver.
- Professional assessment and clear scope
- Local certified restoration team
- Insurance documentation and coordination
Request an Assessment
Tell us where you are and what happened. We will call you back shortly.